The T3-V484 horticultural lamp from Tasty LED use Vero 29C LED emitters driven at 45 watts providing 57% emitter efficiency at full power and higher efficiencies when dimmed.
Total wattage: 196
PAR watts: 103
Emitters: 4 Vero29C 3000K 90CRI
Watts each: 45.3
Power supply: Meanwell HLG series
AC Input (C13): 120-240 volts, 50/60Hz, .75amps at 120V
AC output (C14): for connecting multiple units
Dimensions: 6" x 4.5" x 30"
-Power cords: Single lamps come with 6 foot 16 gauge primary power cables which are 5-15P to C13. The second and third lamp of the same kind will ship with 3 foot 16 gauge connector cables to daisy chain the lamps. We recommend chaining no more than three lamps on a 120v circuit, When ordering two different lamps, a T2 and a T4 for instance, both will ship with primary power cables. If you have a preference contrary to this scheme please note it in the comments section when placing the order and we will be glad to accommodate.
-Ratchet hangers and hardware: 1 pair
-Optics: 90 degree reflectors
Space usage and light intensity in vegetative and flowering mode:
The recommended minimum and maximum flowering and full cycle footprints are at 500 and 1200 PPFD.
The recommended minimum and maximum vegetative footprints are at 300 and 700 PPFD.
24" x 36" 863 PPFD
24" x 48" 647 PPFD
36" x 36" 1150 PPFD (2 units)
M x M 968 PPFD (2 units)
48" x 48" 647 PPFD (2 units)
48" x 48" 970 PPFD (3 units)
60" x 60" 414 PPFD (2 units)
60" x 60" 621 PPFD (3 units)
-The dimmer switch and knob are located beside each other.
-The dimmer switch can be used to flip between the dimming knob's setting and full power.
-Turn the dimmer switch off to insure max brightness.
-For proper coverage keep the lamp 14-16 inches from the canopy.
Built to last. 36 month warranty covers any manufacturing defects. See terms and conditions for details.